100G QSFP28 Active Optical Cable
Description The AQS-MP101-XXXCL is a Four-Channel, Pluggable, Parallel, and Fiber-Optic QSFP+ SR4 for 100 or 40 Gigabit Ethernet, Infiniband FDR/EDR and Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnects applications. It integrates four data lanes in each direction with 100Gbps bandwidth. Each lane can operate at 28.05Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. This module incorporates our technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Features (Low Power) - Bandwidth density of 100Gbps bi-directional - Transmission data rate up to 25.8Gbps per channel - 4 channels 850nm 25G VCSEL array - 4 channels 25G PIN photo detector array - Internal CDR circuits on both receiver and transmitter channels - Hot Pluggable QSFP28 form factor - Maximum link length of 70m on OM3 Multimode Fiber (MMF) and 100m on OM4 MMF - Operating case temperature 0°C to +70°C - 3.3V power supply voltage - Low power consumption <2.5W - RoHS 6 compliant (lead free)
Applications - IEEE 802.3bm 100GBASE SR4 - InfiniBand EDR - Datacom/Telecom switch & router connections - Data Aggregation and Backplane Applications - Proprietary Protocol and Density Applications
Ordering information
|