2x100GBASE-SR4 QSFP DD  Active Optical Cable

Description

The AQD-MDO201-xxxC is an Eight-Channel, Pluggable, Parallel, and Fiber-Optic QSFP Double Density for 2x100 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnects applications. It integrates eight data lanes in each direction with 8x25.78125Gbps bandwidth. Each lane can operate at 25.78125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 76 contact edge type connector. The optical interface uses a 24 fiber MTP (MPO) connector. This module incorporates our technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

Features

- 8 channels full-duplex transceiver modules

- Transmission data rate up to 26Gbps per channel

- 8 channels 850nm VCSEL array

- 8 channels PIN photo detector array

- Internal CDR circuits on both receiver and transmitter channels

- Support CDR bypass

- Low power consumption <4W

- Hot Pluggable QSFP DD form factor

- Maximum link length of 70m on OM3 Multimode Fiber (MMF) and 100m on OM4 MMF

- MPO24 connector receptacle

- Built-in digital diagnostic functions

- Operating case temperature 0°C to +70°C

- 3.3V power supply voltage

- RoHS 6 compliant (lead free)

 Applications

- IEEE 802.3bm 100GBASE SR4

Ordering information