ATF-MPO400

Description

It integrates four data lanes in each direction with 40Gbps bandwidth. Each lane can operate at 10.3125Gbps up to 300 m using OM3 fiber or 400 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector.

Features (Plastic Pull Tab)

-4 channels full-duplex transceiver modules

-Transmission data rate up to 10.5Gbps per channel

-4 channels 850nm VCSEL array

-4 channels PIN photo detector array

-Low power consumption <1.5W 

-Hot Pluggable QSFP form factor

-Maximum link length of 100m on OM3 Multimode Fiber (MMF) and 150m on OM4 MMF

-Single MPO connector receptacle

-Built-in digital diagnostic functions

-Operating case temperature 0°C to +70°C

-3.3V power supply voltage

-RoHS 6 compliant (lead free)

Applications

-40G Ethernet and OTU3

-Datacom/Telecom switch & router connections

-Data Aggregation and Backplane Applications

-Proprietary Protocol and Density Applications

-Infiniband transmission at 4ch SDR, DDR and QDR

Ordering information